Flash adapter with pogo test pins

Flash adapter with pogo test pins for up to 6 pins

Based on the work of Patrik Mayer: https://twitter.com/pregopm/status/1285850490698375168

The following parts are required:

3D prints
1 x M3x30 screw
2 x M3x 10 screw
1 x 8mm spring 20mm long
1 x jumper wire (1x6 Pins)
6 x 1mm Pogo Pins

The M3 threads are modeled in the design and will be printed, there is no need to cut the threads. 

Attention, there is also a thread in all 3 blocks of the base. This way there is no nut required. 

The pogo pins need to be gently pressed into the holes of the female jumper wires.