Lack Extension for Drybox

Introduction

This print makes it easier to store 5 Dryboxes on one Lack Roller. It is designed for 5x20mm tapered screws, all around.
It allows a distance between the Dryboxes of 33mm, this makes it easy to tighten magnets on the Quick Fitting Thing.

There are 2 Versions, I printed mine witout a hole for the allen key, so I guestimated those holes, on the second.

There is only one Print as it works for the left AND the right side

Print Instruction

I made mine with Prusament PLA.
I used 5 Outer shells and laied the print on the 9 holed side and used Supports.

Have fun