The Poverty Pedal

A gas pedal that can be attached to any pistol with a picatinny accessory rail! Included is an option to add muzzle weight. By Internetpizza.

Hardware:

• 2x M5x35 button-head cap screws
• 2x M5 Nuts
• 3/8" Tungsten Pinewood Derby Weights (Weighted Mounts only)
• 3x M3x8 screws (Weighted Mounts only)

Recommended filaments:

• eSun PLA+
• Polymaker PLA Pro
• NO PETG!
• In case you missed that…..  NO PETG!

Printing:

• Print hot (refer to the temperature range of your chosen filament and use the higher end).
• Print slow.
• 4-6 walls.
• 99/100% infill.
• Spacers of various heights to take up the extra space in the weight holders are included.

Print Orientations:

• Print the arm with the large flat side facing down.
• Mounts should be printed standing up on their ends.
• FAILURE TO DO THIS WILL CAUSE THE MOUNT TO BREAK WHEN INSTALLED!