Hueforge of a vintage Guinness advertising poster - There's nothing Like A Guinness by Gilroy (1941).
The photos shows the result in 150*200mm and a nozzle of 0.4
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
If you don't know how ?
Without MMU/AMS/CFS…
https://help.prusa3d.com/article/insert-pause-or-custom-g-code-at-layer_120490
With MMU/AMS/CFS... :
https://help.prusa3d.com/article/colorprint-with-the-mmu_124861#examples
You can use filaments other than those indicated, but the result will differ.
You can use any black filament
Try to use filaments with a similar color and transmission distance.
To get an idea of the transmission distance of your filaments, you can find examples of tests here:
https://www.printables.com/search/models?q=hueforge+td
hueforge description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Yellow
At layer #9 (0.8mm) swap to Dark Brown
At layer #11 (0.96mm) swap to Jade White
At layer #16 (1.36mm) swap to Red for the rest.
The author marked this model as their own original creation.