French vintage advertising - Vin des maillotins - hueforge

Hueforge of a french advertising poster : Le vin des maillotins by Andre Ducre (1950)

The photos shows the result in 200*135mm and a nozzle of 0.4

It says :

"Goutez le vous verrez comme il est bon

Vin des maillotins

Marque commerciale déposée, en vente dans les bonnes maisons"

Traduction :

‘Taste it and you'll see how good it is

Wine of the maillotins

Registered trademark, on sale in good houses’.

You can change the X and Y dimensions but do not change the Z dimensions

You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
If you don't know how ?
Without MMU/AMS/CFS…
https://help.prusa3d.com/article/insert-pause-or-custom-g-code-at-layer_120490

With MMU/AMS/CFS... :
https://help.prusa3d.com/article/colorprint-with-the-mmu_124861#examples

You can use filaments other than those indicated, but the result will differ.
You can use any black filament
Try to use filaments with a similar color and transmission distance.
To get an idea of the transmission distance of your filaments, you can find examples of tests here:
https://www.printables.com/search/models?q=hueforge+td

Hueforge description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 134.84x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:

 PLA BambuLab Basic Black Transmission Distance: 0.6

 PLA BambuLab Basic Red Transmission Distance: 4

 PLA BambuLab Basic Yellow Transmission Distance: 6

 PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

 Start with Black

 At layer #5 (0.48mm) swap to Red

 At layer #11 (0.96mm) swap to Yellow

 At layer #16 (1.36mm) swap to Jade White for the rest.