French vintage poster la chablisienne - hueforge

This is a hueforge of a french poster by Henri Le Monnier dating from 1926 to promote Chablis wines (French dry white wine).

The photos shows the result in 132.76x200mm and a nozzle of 0.4

You can change the X and Y dimensions but do not change the Z dimensions

You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
If you don't know how ?
Without MMU/AMS/CFS…
https://help.prusa3d.com/article/insert-pause-or-custom-g-code-at-layer_120490

With MMU/AMS/CFS... :
https://help.prusa3d.com/article/colorprint-with-the-mmu_124861#examples

You can use filaments other than those indicated, but the result will differ.
You can use any black filament
Try to use filaments with a similar color and transmission distance.
To get an idea of the transmission distance of your filaments, you can find examples of tests here:
https://www.printables.com/search/models?q=hueforge+td

Hueforge description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 132.76x200mm in size  

 You may print at higher layer heights below the Min Depth of 0.48mm  

 The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:  

    PLA BambuLab Basic Black Transmission Distance: 0.6

    PLA BambuLab Basic Blue Gray Transmission Distance: 3  

    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5  

    PLA BambuLab Basic Jade White Transmission Distance: 5  

    PLA BambuLab Basic Red Transmission Distance: 4  

    PLA BambuLab Basic Yellow Transmission Distance: 6  

This print uses 6 unique filaments

Swap Instructions:  

    Start with Black  

    At layer #6 (0.56mm) swap to Blue Gray  

    At layer #7 (0.64mm) swap to Marine Blue  

    At layer #8 (0.72mm) swap to Jade White  

    At layer #9 (0.8mm) swap to Red  

    At layer #14 (1.2mm) swap to Yellow  

    At layer #19 (1.6mm) swap to Jade White for the rest.