Vintage Charlie Chaplin poster - hueforge

Hueforge of a vintage Charlie Chaplin poster for the movie Charlot from 1917 (illustrator Roberty)
The photos shows the result in 200*150mm and a nozzle of 0.4

You can change the X and Y dimensions but do not change the Z dimensions  

You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
If you don't know how ?
Without MMU/AMS/CFS…
https://help.prusa3d.com/article/insert-pause-or-custom-g-code-at-layer_120490

With MMU/AMS/CFS... :
https://help.prusa3d.com/article/colorprint-with-the-mmu_124861#examples

You can use filaments other than those indicated, but the result will differ.
You can use any black filament
Try to use filaments with a similar color and transmission distance.
To get an idea of the transmission distance of your filaments, you can find examples of tests here:
https://www.printables.com/search/models?q=hueforge+td

Hueforge description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 149.97x200mm in size  

 You may print at higher layer heights below the Min Depth of 0.48mm  

 The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:  

    PLA BambuLab Basic Black Transmission Distance: 0.6  

    PLA BambuLab Basic Blue Gray Transmission Distance: 3  

    PLA BambuLab Basic Jade White Transmission Distance: 5  

    PLA BambuLab Basic Marron Red Transmission Distance: 1.3  

    PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.5  

This print uses 5 unique filaments

Swap Instructions:  

    Start with Black  

    At layer #6 (0.56mm) swap to Blue Gray  

    At layer #7 (0.64mm) swap to Jade White  

    At layer #8 (0.72mm) swap to Marron Red  

    At layer #9 (0.8mm) swap to Sunflower Yellow  

    At layer #13 (1.12mm) swap to Jade White for the rest.