Charlie Chaplin Smiling - hueforge

Hueforge of Charlie Chaplin Smiling
The photos shows the result in 150*200mm and a nozzle of 0.4

You can change the X and Y dimensions but do not change the Z dimensions  

For this hueforge you can use any black PLA, most white and grey PLA should work (avoid silk PLA)

You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
If you don't know how ?
Without MMU/AMS/CFS…
https://help.prusa3d.com/article/insert-pause-or-custom-g-code-at-layer_120490

With MMU/AMS/CFS... :
https://help.prusa3d.com/article/colorprint-with-the-mmu_124861#examples

You can use filaments other than those indicated, but the result will differ.
you can use any black filament
Try to use filaments with a similar color and transmission distance.
To get an idea of the transmission distance of your filaments, you can find examples of tests here:
https://www.printables.com/search/models?q=hueforge+td

hueforge description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size  

 You may print at higher layer heights below the Min Depth of 0.48mm  

 The Max Depth is 2.2mm and the Actual Depth is 1.4mm

Filaments Used:  

    PLA BambuLab Basic Black Transmission Distance: 0.6  

    PLA BambuLab Basic Blue Gray Transmission Distance: 3  

    PLA BambuLab Basic Jade White Transmission Distance: 5  

This print uses 3 unique filaments

Swap Instructions:  

    Start with Black  

    At layer #7 (0.64mm) swap to Blue Gray  

    At layer #10 (0.88mm) swap to Jade White for the rest.