Updated Modular Keurig K-Cups Coffee Pods Stand

This is a remix of my previous modular coffee cups stand. I thickened the arms that hold the coffee cups after breaking a few of them off.

Original: https://www.printables.com/model/1103572-modular-keurig-k-cups-coffee-pods-stand 

Description:
This is a modular stand for Keurig K-Cups coffee pods. Each module contains 8 slots to fit 8 pods and can be stacked as high as needed! Each module spins individually and requires no additional hardware to assemble.

Printing Instructions (Standard):
I recommend PLA with 0.2mm layer height, 10% infill, 2-3 walls, and no supports. Each part is printed as oriented. Using 2 walls and 10% infill, each module of the stand is about 50 grams.

I have also included a test module that includes one slot to make sure your coffee pods fit before committing to the entire print. The diameter of each slot is 41mm.

If you want to create your own topper for the stand, the dimensions of the shaft are 15mm diameter and 30mm long with a 2mm fillet on the bottom (these are the same as my previous design, so check out my snowman topper and the makes for ideas).

Please comment with any questions or specific requests.

Happy Printing!

I thickened the arms that hold the coffee cups after breaking a few of them off. It should be much more durable.