BoxTurtle-ERCF-Filametrix-FilamAtrix-Stealthburner-MG90S Servo Depressor Gantry Mount (CW2 and G2E)

Here Are you seeing , an Gantry Servo Depressor for the Filametrix or the FilamAtrix.

This Servo Depressor works with the normal Filametrix or FilamAtrix (CW2 and G2E)

Material are needed:

1 x M3 Heatnut

1 x M3 4x3x5 Heatinsert (short voron on Amazon etc)

2 x M3 roll in Nut or T-Nut

2 x M3x8 SHCS or BHCS screws

1x M3x16 M3x14 or M3x12 BHCS Should all work test it out .

1 x Mg90S 180 degress 

1 Set screws that included at the MG90S Servo.

The Original arm was a little to high Mounted , i adjusted it a little bit lower. Also Alligned the Arm Correctly to the MG90S Gear!