Creality K2 Plus poop guide and bin (magnetized)
Creality K2 Plus Filament 'poop' guide and bin held in place using 8mm dia. x 2mm thick neodymium magnets.
9
70
1
400
updated March 8, 2025
Description
PDFCreality K2 Plus Filament 'poop' guide and bin held in place using 8mm dia. x 2mm thick neodymium magnets.
Features
- Guide ensures filament poop directed into the bin.
- Guide has alignment tabs for easy fitting into the printer's chute exit.
- Guide and bin are separate to allow for overflow without impeding printer's chute exit.
- Doesn't impede fan area.
Non-printed materials required
- 5 x 8mm dia. x 2mm thick neodymium magnets.
- Cyanoacrylate, Epoxy (or similar) glue.
Print settings
| Property | Value | Notes |
| Filament type | PETG/ABS/PLA | |
| Filament color | Black | Black to match back panel color. |
| Layer height | 0.2 to 0.3mm | |
| Infill | 100% | |
| Perimeters | N/A | |
| Support material | No | |
| Model orientation |
| |
| Clean up | N/A |
Assembly
Glue the magnets into the provided holes.
Tags
Model origin
The author marked this model as their own original creation.
