Rose with Stem

My Rose is a remix of https://www.printables.com/model/1170174-single-extrudermulti-part-rose-fusion360 by @mosselini1 which is a remix of https://www.printables.com/model/1161854-rose-decor by @29flo

My Stem is a remix of https://www.printables.com/model/133069-spikey-rose-stemshaft by @Grafit.

If you would like to make the stem longer you can download my stem extensions here. https://www.printables.com/model/709575-better-rose-stem-extensions 

I used my 95mm Rose Stem Extension in the picture.

You can find the vase in my Flowers & Vases collection. https://www.printables.com/@Eds3dOdyssey/collections/1227023

Updates

April 6/25 - Added a stem that has leaves.

Printer Settings

PrusaSlicer 2.9

Rose

Layer Height - .15

Perimeters – 2

Seam - Random

Bottom fill pattern – I like to use Archimedean Chords

Support Material

• Turn on Generate Support Material and Auto Generated Supports
• Overhang Threshold – 15 or 20
• Style - Organic
• Top Contact Z Distance – Prusa recommends 50 to 75% of the Layer Height

Fuzzy Skin

• Outside Walls
• Thickness - .2
• Point Distance - .4

Paint-on Fuzzy Skin

• Tool Type – Smart Fill 85%

The reason I use both Fuzzy Skin and Paint-on is because Outside Walls misses parts of the inside of the Rose. Make sure there is no Fuzzy Skin in the hole on the bottom. 

Stem

Layer Height - .2

Perimeters – 2

Minimum Shell Thickness 

• Top and Bottom – 1mm

Seam - Random

Top and Bottom fill pattern – I like to use Concentric with the stem with leaves.

Brim – You might need to use a brim for the dowel.

Fuzzy Skin

• Outside Walls
• Thickness - .2
• Point Distance - .4

Make sure there is no Fuzzy Skin in the holes on the top and bottom. 

Do not use Fuzzy Skin on the Dowel.

If the dowel rod is a little too small or a little too big try increasing or decreasing the XY by 1 or 2%.

I use a heat gun to bend the leaves. 

If you have any questions, just ask.

Please post pictures!!!

Filament used in the picture

Roses - Printed Solid PLA Jessie Elixir Royal Ruby and Prusa PLA Ms Pink

Stem - Printed Solid PLA Jessie Green Ice

Vase - Prusa PLA Pearl White

I changed the Stem.