3030 Extrusion holder for MK4S for Buddy3D Camera, Gridfinity and more

A versatile 3030 extrusion holder: just print out as many elements as you need (normal or short length) and chain them together. Tolerances are 0,1 mm, depending on the printer and the orientation of the print you may want to glue them together. 

You can either use the normal extension or chain it with a 15 degree extension. You can mount a Buddy 3D camera, and a Gridfinity extension is also available, just in case you need it. You also have an extension to be used with zip-ties to mount any other thing you may attach (e.g. a Raspberry Pi camera,…) and a raw extension that you can use for remixing, or you can just merge it in your slicer with whatever idea you have - I am looking forward to your ideas and makes  :)

The original holder that I remixed (https://www.printables.com/model/1148045-buddy-3d-camera-mount-for-mk4s), interfered with the bearings on the left side of the MK4S, so I decided to make a 3030 aluminium mount version, where I combined different ideas: I replaced the holding system with Electronsmtih's 3030 Mount and added the Holder for the Buddy3D camera by chipmen. Then I wanted to make it more versatile, and added a gridfinity holder, just in case it is useful for somebody (Gridfinity: https://creativecommons.org/licenses/by-nc-sa/4.0/ - Gridfinity designed by Zack Freedman)