RPi 5 + NVMe + POE cabinet and rack

I found several similar projects online but none that suited me 100%. 

I focused on RPi5 with Pimoroni NVMe SSD disk and Waveshare POE hat as this is what I will use from now on. Also fits RPi 3B+ and probably the other Pi's with the same form factor.

The rack is designed for M4 threaded brass hot inserts.  Not needed when mounted as shown in the pictues.

All parts printed front face down without supports.

The 4 spacers is for fixing the Pimoroni to the RPi after the POE hat is installed.

The rack can be mounted in several directions.