Monkey Face Button

Monkeys face button. +- 20 mm diameter with two button holes.

10m

1× print file

0.15 mm

0.40 mm

1.00 g

276

updated January 4, 2023

Description

Decorative sew-on button.

The button is approximately 20 mm in diameter.

The button has a recess for the thread to stay hidden/flush to the surface.

Print with 100% infill is recommended.

Upscaling is possible.

Downscaling is not recommended as the holes might be too small (1.5 mm at 100%).

Print in higher resolution as is 0.15mm layer height or better.

The author marked this model as their own original creation.