Trenchy V1

a Benchy for modern printers. Benchmark all common 3D printer challenges: angles, overhangs, briges, cooling, adhesion, retraction, stringing, etc.

Enjoy a fresh, benchy approach with a good-looking end result as ornament.

It is based on a tractor, hence the name trenchy. I chose a tractor because it is as important as a boat but is the opposite.

Print Settings:
-----------------

- 0.2mm layer height
- 20% infill
- 2x perimeters
- NO support

Print time is around 2 hours... if your printer can even do it \(ツ)/