tetra · boxes

tetra · boxes

modern minimalist boxes with magnetic lids and optional inserts, in two sizes: short and wide / tall and slim

dimensions in mm:

• short and wide  ~ x:153 · y:123 · z:81
• tall and slim  ~ x:103 · y:123 · z:121

important:

• you'll need 4 6x3mm magnets for each of the boxes, as well as some drops of super glue to ensure they really stay in their position and don't get pulled away from the slot.
• please make sure that you are very mindful of the polarities of the magnet when assembling and gluing in their spots as you want to make sure that each section attracts and not repels the one that will sit above/below

photos show printed in the new bambu lab bone white pla, terracota matte pla and charcoal matte pla

• .40mm nozzle
• adaptive layer height
• 10% gyroid infill
• seam at the back
• no supports

notes

• includes bambu studio 3mf files and STLs in folders
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• commercial licence membership available on my patreon