Nozzle Wiper with Purge Bucket

A nozzle wiper to utilize 3DPrintDemon's modules for a brush, a A1 silicon wiper, or a A1 Mini silicon wiper. It replaces the tap at the back of the SV08. I didn't have Voron standard M3 Inserts so I made the hole for a 4.5 OD insert. Modules should fit from the original design page. I removed the magnet holes because I don't plan on using the bucket at the moment.

STEP file included to make it a bit easier for people to make their own adjustments. I haven't printed it yet because I'm working on a larger project at the moment.

I've removed the magnet holes in the holder and the bucket parts. I've left, but didn't cut, the components for a 4x3 magnet. Just adjust component size and position and then cut into parts. I also tightened the hold on the holder for a smaller M3 Heat insert. I couldn't find my magnets so I held off on add them to the parts.