Cute Banana

Tips for printing:

• Supports: No!
• Layer height: 0.16mm (optimal)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: Not necessarily if you have good print adhesion!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Colors and filament I used (3 Color Version):

• PLA / White - for the eyes and peel
• PLA / Black - for the eyes and nose
• PLA / Yellow - for the body

Colors and filament I used (3 Color Version Half Painted) (Faster Printing):

• PLA / White - for the eyes
• PLA / Black - for the eyes and nose
• PLA / Yellow - for the body

Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

If you want to support me or use my models commercially you can use this link to my Patreon page. Thank you!
Patreon: https://patreon.com/3DPrintyi

Happy printing!