Ammo Returning Target

I made this so I could use it with another model made by jdwoods. He made a finger gun called Ball Blaster. It shoots sphere bullets which roll. I suggest you make this if you make that. I don’t think cylinder shaped bullets will be able to roll out or even fit in the mechanism of my Ammo Returning Target.

Print Settings:

Print Orientation: Leave it how I set it.

Supports: I think Tree Supports would be best. Also don't put supports in the model. Put the supports outside of the model, like for the text that says “This Side Down”

Slicer: I used Orca Slicer since they have an Auto Tree Supports feature and if you don’t like theirs placements you can also manually add where you want the supports with their other Manual feature.

Infill Percentage: 10% if using with Ball Blaster and 95%-100% if using with a low power BB Gun.  (It still prob won’t survive a BB Gun but you can try)

Filament: PLA for Ball Blaster or any Toy Ball Shooter. For a BB Gun, use something way Stronger than PLA like PETG, PEEK, PC, ABS, ASA etc. Definitely Don’t use TPU.
 

(ONCE  AGAIN, NOT MADE FOR REAL GUNS OR BB GUNS BECAUSE IT WILL OBVIOUSLY GO RIGHT THROUGH. I mean c’mon, it’s just made with plastic 😑)