Why didn't you mention that you need to cut off the metal pegs to fit flush? This is kinda an important detail since they are unusable without doing so.
DeWalt 20V/60V Battery Pegboard NO SUPPORTS
Pegboard holders for DeWalt batteries. Works with 20V and 60V batteries.
12
25
0
338
updated
June 24, 2025
Makes
Comments
@pwnerman_194936 Yup. You are correct. It has been some time since I made these and that is a detail that I forgot about. Thanks for catching it.
@swholmstead I wanted to provide another update and mention that the dual holder option you have on this isn't compatible with any of the modern style batteries that I could see. There was not nearly enough room for any of the sizes I tested from an 8ah XR 20v to a 6ah regular 20v. You couldn't put any of them side by side on the dual battery holder. The 9ah Flexvolt was even larger so no bueno. I do see in your photos you have older gen batteries.Looks like they were skinnier back in the day while the new ones have lots of rubber molding etc. It might work for the 2-4ah batteries or the powerstack ones but I don't have any of those to test.
Also I see no downside to just using singles because you don't lose any pegboard space. The only thing is that you will need to use more metal hangers but they are cheap anyway. (edited)
View one more comment