Aspire Planter with Drainage Holes and Drip Tray

Aspire Planter: 
The Aspire Planter is the perfect size for small to medium sized houseplants, succulents, or cacti. The planter features built-in drainage holes and a drip tray that is perfectly contoured to the bottom of the planter, allowing for stable and easy placement. The drip tray also elevates the planter above the tray, allowing plenty of room for water to drain and air to flow underneath the planter, helping water to evaporate quickly and prevent your plants from sitting in excess water. Balancing form with function, this planter blends mid-century modern design while prioritizing the health of your plants.

Printing Notes:

• There are three sizes (4in, 6in, and 8in) included in the print profile and raw model files. The size dimension refers to interior diameter of the planter. 
• These should be very straightforward prints. The settings I use that have produced good results are the following: 
  • 1.2mm thick walls (three walls with 0.4mm nozzle, two walls with 0.6mm nozzle).
  • 10% gyroid infill
  • 0.2mm layer height
  • 8 top and 8 bottom layers

Additional Notes:

• This model is not for commercial use. If you are interested in selling your 3D prints of my models, please refer to my Printables Club.
• If you like this design, consider leaving a tip! I'm a university student, so anything helps!
  • https://www.paypal.me/theprintedplanter