Anycubic Kossel 15.5mm IMU Mount and Drill Guide

A mount for generic 15.5mm IMUs for the Anycubic Kossel.  Done as part of a Klipper retrofitting project.

Go slow when drilling and tapping.  Taps break very easily.  You will likely want to use separate drills and taps.  You can change the hole size in FreeCAD to match the diameter of whatever drill bit you are using if you aren't using combo drill+taps.

I use this IMU: https://www.aliexpress.us/item/3256807321107101.html