Symphony of the Night (hueforge)

This is my first project using the Hueforge program. I picked this because it is from one of my favorite games of all time, Castlevania Symphony of the Night.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm using a 0.4mm nozzle.

The Model is 180x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Grey Transmission Distance: 2
    PLA+ Sunlu Silver Transmission Distance: 2
    PLA+ Sunlu Gold Transmission Distance: 5
    PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Grey
    At layer #14 (1.2mm) swap to Silver
    At layer #17 (1.44mm) swap to Gold
    At layer #19 (1.6mm) swap to White for the rest.