FLP-07 Goblin Silly Shell Single Shot Foam Blaster

Goblin with all the upgrades. Uses my elastic bungee break lever remix at https://www.printables.com/model/1745145-flp-07-goblin-elastic-break-lever.

One of my favorite blasters for the awewome Silly Shell line of blasters so far. I will let you know if this still holds true after building the Breacher. Here we gooooooo! Thanks for the awesome model and Shout out to BearsWares for the hardware

Hey, i was wondering wherether it is i should print this in PETG or if PLA will work fine. I have seen some people talking about snaped pluger rods and heads.

decent

@shoelesshisto_427318 Very fun blaster, however I've been having a major issue recently with the GoblinFrontBodyV4 piece where it won't screw in all the way for any of the 3 bolts, so it is now unusable. 😔 I tried replacing the bolts with others and even reprinted the front plate, but the bolts still won't go in securely. I tried shorter bolts, but that too didn't help. I really liked using this blaster, but it just tore itself after I'd shot it a dozen or two times.
Do you have any suggestions to fix this issue or what I may have done wrong?

Amazing blaster 🤪 (edited)

Really fun to use. I just need to cut a proper PT for mine.

Hey so I made a remix of this and I wanted to know if it would be okay for me to sell my remix?

Can I put a higher power spring in it to get 300 fps? (with the sniper barrel). Would it break? What spring should I get and what should I cut it to? (edited)

Looks awesome, but that's where the good end with this blaster. Nightmare assembly, with captive nuts that become inaccessible as you assemble; If the nut ends up spinning loose or is not aligned you have to disassemble the whole blaster to access the nut, which might not be possible if the nut is threaded but spinning loose. Obnoxious BOM with bolt lengths only a couple millimeters apart that absolutely could have been consolidated. I'm positive a design like this doesn't need 30, 25, 12, 10, 8, and 6mm lengths... Over half of the blaster design basically requires remixed part replacements; the comically massive grip needs to be replaced with the smaller or Lynx grip, the awkward trigger needs to be replaced with the comfort one, and if you want to pull on the priming handle with more than one finger, a Tbar or larger handle is required. I would not bother making another one of these and wouldn't recommend anyone else especially if it might be your first blaster.

What's the link to the holster? The link that's there is to a priming grip.