Hummingbird #7 - Hueforge

Hummingbird #7 - Hueforge

I'm starting to make these at 180mmx180mm so that you don't need a larger printer to print frames if desired. See below for frame recommendation.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Dark Grey Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Grey
At layer #12 (1.04mm) swap to Steel Grey
At layer #17 (1.44mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.

I recommend this frame: https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings

It's a great design and you can set it for any size hueforge print you want. You can use the free version of Fusion360 to create new sizes easily, don't be afraid to try it out even if you've never used Fusion360 before.

Enjoy!