Cricut Maker 3 Riser Leg

This is a model for riser legs for the Cricut Maker 3 that adds 50mm to the machines height. I had tried some other models before but they didn't stay attached very well and required hard to remove supports for the rubber foot retainer.

This model requires no supports. It fits tightly into the existing foot slots in the Cricut and can be moved without the legs falling off. It also has a bit of a gap between the machine so you can still grab the Cricut from underneath.

I printed in PLA+ with 3 walls and 15% infill. Print 2 of the part (no need to mirror, it's symmetrical) and attach to the bottom of the Cricut. You'll need to remove the current rubber feet on the bottom, but they are just slotted in, not glued. Then push the feet into the holes on the bottom of the riser and attach the riser in the now empty foot hole.