Wera Bins Gridfinity 1/2 nuts 10 - 18 and 19-27 and 30-32 metric

Here are three bins for Wera Zyklop ½ nuts, one from 10 to 18, 19 to 27 and 30-32.

The idea is to pick them with the ratchet and release them back with it. So they fit very tight and I realised there is a tolerance when the are manifactured. If they are to tight take a electric drill with a ½ adapter and turn the nut both ways till it fits they way it should.

No supports needed. Pla or petg.

if you want a colorchange for the numbers, its at layer 187.