3D Models 3D PrintersCreality Parts & Upgrades

K2 Plus Printing Glass PETG Profile

0 reviews
Settings used to get the cleares possible PETG prints. I used the previous progress made by Rygar1432 as starting point
4
16
0
111
updated March 2, 2025

Summary

PDF
Settings used to get the cleares possible PETG prints. I used the previous progress made by Rygar1432 as starting point

Tags

petg plus glass profile transparent

Model origin

The author remixed this model.

How To Print Glass
 by Rygar1432
 

Differences of the remix compared to the original

Top sample used original posts settings - Bottom used modified settings.

The settings should transfer with the .3mf file.  Biggest change I recommend is using a 0.8mm nozzle.  Use the standard PETG Settings and change the following settings:

Layer Height 0,16

All Line Widths 1,0mm

1 Wall Loop

0 Top Surfaces

0 Bottom Surfaces

Top/Bottom Overlap 35%

100% Infill

Aligned Rectilinier Infill

Infill/Wall Overlap 35%

Sparse Infill direction/Solid Infill direction 0°

All Speed 20mm/s (except travel speed)

 

Do not overextrude like the original mentions! Use flow Calibration, mine was 0,97

Use a LOW TEMPERATURE - mine was set for first layer 5°C above minimum recommended temperature and the rest at 10°C above the minimum recommended temperature for my filament.

DISABLE ALL COOLING

Use a smooth build plate

 

License