Skadis Mount: Philips Hue Play Ambience Lightbar

Sturdy brackets for those wanting to use their Philips Hue Lightbars for illuminating e.g. their workbench area. 

• Single part
• 155 mm offset from the pegboard to get evenly distributed lighting on your working area. 
• No additional materials required: attachment with the original screw provided with the Philips Hue Lightbar.
• Perpendicular orientation to the mount, therefore  the light doesn't blind you when looking from the front. 

To get the most reliable and stiff results, I recommend printing the parts on the side with supports on:

• 0.2 mm layer height
• Minimum 4 walls, 20% infill density (cubic)
• Tree supports (30° threshold angle)