RAK Meshtastic Starter Kit - with GPS and buzzer

This 3mm wider case is a remix from the genious original “RAK Meshtastic Starter Kit - No Additional Hardware Case” from pdxlocs.
I also used two other remixes here for the frame and the front and back cover.

The frame can hold the GPS antenna and the front and back covers are flat and without pattern and also got cutouts for the GPS antenna and also the buzzer. I also added a small part for stability improovement.

The lid is available with and without hole.

The buzzer module is placed in slot “C” instead of the acceleration module which i removerd. Unfortunately, the buzzer is very quiet and hard to hear.

Printed in white PLA on Anycubic i3 mega S without support.

The case is 3mm wider and the frame got a option to put the GPS antenna in, also there is a hole in the lid for the GPS antenna.