Box Holder / Support for Car Trunk

Hi everyone,
I made a support corner for my car trunk.
It prevents your boxes from sliding around in the trunk. 
It has simple velcro strips with adhesive tape.

The print takes around 4,5 hours on my Ender 3 V3 using PET-G (around 120g)

• 10% infill
• 2 walls
• with brim
• outer walls first for better dimensional accuracy

You also need a velscro strap with adhesive tape, I bought one 200x100mm and cut it to size

The tolerances on the joints are quite small so if you experience warping during printing, you may have to use some force to join it together.