Birb House (Window Bird Feeder)

Window Bird Feeder – “Birb House”

A cute little bird feeder designed to sit outside your window using 3 suction cups fitting a 4.5mm hole (M4 will work) for a secure hold. One mount is in the back of the tower, the two other mounts are at the back of the base tray.

🛠 What You'll Need

• 3 suction cups (M4) to attach the feeder to your window.
• Birdseed or something similar to offer the birbs.

🖨 How to Print

• Layer height: 0.2mm (recommended)
• Walls: 2
• Infill: 15% (or more for extra durability)
• Supports: Not needed
• Note: I printed the base and the roof on a single plate using my Bambu Lab A1 (256mm x 256mm x 256mm). If you have a smaller printer you can of course still print it on two plates.

📏 Dimensions

• Width: 160mm
• Depth: 120mm
• Height: 96mm