Portable Laptop Stand - Heavy duty version

Really liked the laptop stand from @emeremnd_296120 but for me it seemed a bit shaky, so I reconstructed and improved it a bit. I did the following changes

• Thicker base and rest (5mm → 6mm)
• Larger rest and base
• larger slotted holes to allow a total width of 200mm opened
• moved the trigger as far back as possible for higher stability
• angled holes at the base for the trigger for better fit
• greater angle and larger stop of the laptop at the front so ensure it can not slip over
• optional usage of screws due to the small plastic hinge is not very stable and hard to mount (I used 4x M3x8, 2x M3x12, 2x M3x20)

To edit the model you need FreeCAD 1.0 (https://www.freecad.org/downloads.php).

If you have any questions you can ask me in the comments.

Printed in PETG and TPU with standard confirmation of 0.2mm layer height, 0.4mm nozzle and 35% percent infill. Organic support added for the large slotted hole at the rests and the angled noslip TPU parts. You are still able to print this model on a mini, just need to turn all parts by 45°.

Happy printing :)

• larger
• thicker
• moved hinge
• angle of the front stopper