Google Nest Audio Ceiling Mount

Simple ceiling mount for the Google Nest Audio smart-speaker/assistant.

It can likely also be used as a wall mount, since the “belts” are a fairly tight fit and the friction between them and the fabric-covered surface should be plenty to keep it in place. I have not tested this though.

Distance between the mount's screw holes is 45 mm.

You should print the belts flat on the print bed, to ensure high strength - same goes for the mount-part.

Supports required for the mount-part, not the belts.

You can choose to glue the belts onto the mount-part's tabs or use a small self-tapping screw.
I used two M3 10mm self-tapping screw - screw color doesn't matter since it will be hidden against the ceiling/wall when mounted.