Paramtric Burger Patty Press

I needed a patty press, so - as a maker - I printed one. I chose the model of @Johannes_46001 but for me the diameter and height did not fit for me and due to the thick walls the printing time was to high for me. Quickly reconstructed with FreeCAD I was able to make the burgers in time. After refining the model I upload here this remix so you don't have to reconstruct it as I did.

To edit the model you need FreeCAD 1.0 (https://www.freecad.org/downloads.php) and here you can edit all the values in “VarSet”. To export the model for the use in your slicer you have to mark all necessary objects (“case” and “plate”) then click File → Export… and choose .3mf as format. The following parameters are editable

• diameter
• height
• wallwidth (for me 1.4mm is perfect in printing time vs stability)

If you have any questions you can ask me in the comments.

Printed in PETG with standard configuration of 0.2mm layer height, 0.4mm nozzle and 25% percent infill.

Happy printing :)

• thinner walls
• custom diameter
• custom height