500w Daedalus TwoTrees Vacuum Mount Adapter

500w vacuum adapter for Daedalus spindle. The vacuum that can be purchased for the TTC450 CNC machine is a must. Link below for the spindle upgrade I used, TwoTrees sells their own, but I already had this spindle. You will also need the adapter plate found on Printables to mount the 500w spindle if using an aftermarket one like I did.

Spindle: https://www.amazon.com/dp/B083VRT6Y3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

TwoTrees TTC450 Pro: https://www.twotrees3dofficial.com/products/two-trees-ttc-450-pro-cnc-router-machine

500w Adapter Plate: https://www.printables.com/model/807690-motor-adapter-for-cnc-milling-machine-ttc450

You will need the following minimum hardware (also pictured):

3pc of M4x12mm panhead screws

2pc of M4x16mm panhead screws

3-4pc M4x6mm L  heat inserts  (the holes in the model could be a little bigger)

Screws in this kit:

https://www.amazon.com/dp/B0DQDH7KLQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Printed with:

0.4mm nozzle, 2mm height, 30% infill, supports on

The holes for the spindle are ever so slightly off… you can tweak the model to your hearts desire.