Drum Head Wall Mount

A friend of mine was kind enough to gift me a signed drum head from my favorite metal band Avatar. I had it hanging with a couple push pins, but that was finicky and with a gust from the fan at the right angle knocks it off the wall. 

I wanted a good way to mount the 16in Evans G2 drum head with the ability to take it down for any reason. So I came up with a design for others to use. Should fit any drum head with a diameter of 16in's and a metal ring of 7mm's thick.

Clips in place and is snug fit.

Printed in .2 layer height with 15% infill but could probably get away with 5%. No supports needed.

Use 1 to 2 medium command strips, 1 is more than enough, 2 is overkill but keeps the mount from wobbling ever so slightly.

Idk if its necessary, but I used courser (180) sand paper to scuff up the back of the print to make sure the command strips sticks well.