QRCode Display Stand (pr&mk, fusion360)

A display stand that displays printables and makerworld qrcodes to incite the passerby's to visit these places and follow/leave reviews.

This model was made with qrcodes made with this model: https://www.printables.com/model/1212232-stl-qrcode-maker-python , in mind.

The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily.

Printing Information:

• Print all pieces flat on the bed, the bases on the face accepting the qrcode, the panels on their backs and the connecors on either flat side.
• Use regular supports to support the bottom of the qrcode holes.
• Print all models separately and split the connectors model to its parts

All pieces should press-fit together but if needed you can adjust the tolerances in fusion or simply use a bit of glue.

Note also that while this model is free to use, keep in mind that the logos used are property of their respective companies so you should ask their permission would you want to use it commercially.

I changed the logos to those of printables and makerworld