2.13 inch eink epaper screen magnetic label

This is a housing component for WeActStudio's 2.13in link labels, available on AliExpress. The front piece has a cutout for just the link portion of the screen, while the back piece has cutouts for pin access. 

The back half has 2 cutouts, one for the vertical pins and one for the 4x2 header, and a smaller cut-out so the screen sits flush. The front piece has 4 very thin pegs to keep the screen in place, which is a press fit into the back piece, keeping the screen in place. If you want to remove the screen and the front piece, push on the cutouts at the back; it should come out without damaging the pins.

For flexibility, the 3mf file includes 3 different body designs:

1. Has a pause mid-print for you to add your own 10mm x 2mm magnets
2. No mid-print pause, instead it includes 2 spaces for you to glue your 10x2mm magnets
3. No magnets in the design, allows you to glue the housing or add your own connection method