Dragon Ace for Voron Stealtburner (cartographer / beacon)

Triangle labs v6 nozzles are 1mm longer then normal v6 so hot end was sitting to low and it was messing with my cartographer mount.

I calculated the difference from my Dragon HF mount to make it exactly the same
Dragon hf is 45.5mm
Dragon ace is 52mm
It should be 6.5mm difference..

I checked distance of the mount on dragon HF part and its 16mm thick
KrisV version is 10.7 ... so nozzle was sticking out 1.2mm more

Cad file shows the hotend to be 51 instead of 52 because their nozzle is 1mm longer then regular v6.

hopefully it helps if you also have cartographer/beacon

I made the hotend to sit 1.2mm higher because of traingle labs nozzles are a 1mm longer.