Tree for Gloomhaven

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it.

Overlay tile replacement for the board game Gloomhaven. Canopy is partially hollow and removable so you can see underneath if it gets in the way. No supports needed!

Tile Count: 3

Revisions:

V2: I would print V2 as the default for Gloomhaven, I tried to optimize this one for scale. It also has the most branches when the canopy is removed. The canopy rests on the top of the branches in one orientation.

V1: This older version has a little bigger canopy and thicker trunk/branches but is nice enough that I thought I'd include it. The canopy attaches to the base with three pins.

Print instructions

Resolution: 0.15mm Canopy, 0.10mm Tree
Infill: 5% for Canopy, 20% for Tree

Post-Printing

I painted the canopy with a few layers of green. Started with Dark green and highlighted with dark green mixed with successively more yellow. Final dry brush with the lightest green and some white.

For the trunk I started with a brown mixed with black and then a highlight with brown. Dark grey for stones with light grey highlights.

Encouragement

If you like what I'm doing or use this in your game consider buying me a coffee or sending me a tip:

Buy me a coffee