DJI O4 Pro Camera Pod For Quadmula F5 and F5 Mini- 20 Deg

Here's my pod I made for the DJI O4 Pro Camera and the Quadmula F5 frames. I wanted something as stubby as possible, that still left room for the dual capacitor setup, and required no modifications to the frame. It is locked at 20 degrees, as this is a personal project and I generally fly 20 degrees. I will likely make other degree options available, and will likely update over time. But the frame and camera fitment is perfect, and it does exactly what I need. 

Normal .20 mm layer height will work, but it does print better with small layers (.14-.18mm). I've also printed it flat on bottom, flat on standoffs, and on its back, and they all print well, but printing it on it's back as it's uploaded here seems to give the best all around quality. Recommend printing with tree supports, will list what I've been using for quality prints below. Raft layers are not required but give the bottom interface layers a cleaner print. 
 

Check out my O4 Pro Antenna mount as well for Quadmula F5! Have version with and w/o T receiver antenna mount.

Layer height: .18mm with .30 initial layer

Infill: 70-100%

Support: Organic/Tree style w/ Support/Object XY Distance of 0.15mm

Raft Layers (recommended): 3 layers w/ 0.1mm Raft Contact Z Distance