Colored Prototype Rayquaza Flexible 3 colors with magnets

This 3 color print makes a nice shiny mega Rayquaza!  Also adds slots for press fit 6x3mm magnets!  Using red, black, and white.  But feel free to add more colors to it!

I recommend using a small nozzle and a small layer height so that it prints out with less lines.  Unfortunately, it's not perfect as I am new to this stuff.  Build Images to come.

v1 Update: painted supports so there is none in the flexi bits.  Never print supports in the joints of flexi models like this.

v2 Update: increased magnet size as they were hard to fit in.  Mirrored the attachable parts and improved painting to make it symmetrical.  Increased eye size as it was too small.

Added 3 colors to it so it looks more like a shiny mega Rayquaza!  3 colors as I only have black, red and white.  Feel free to modify it to add more!