My Test Cube

I needed a test cube that did more than the basic ones I am finding. This cube has a gap on the bottom to show bridging. In one corner there is a place to show an aggressive step over with a thin wall. There are several places to show overhangs.

Printing Permeameters:

0.2mm quality

15% infill

No supports

4 walls

It took my offices Creality CR-10 Smart approx. 1 hour to print. My Prusa mini+ did it in approx. 40 minutes

Using this I have been able to dial in my printers settings for cleaner prints. Please let me know if you have any comments.