MTV unplugged Hueforge | Twenty One Pilots

Twenty One Pilots MTV unplugged Album Hueforge! |-/

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:

Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #12 (1.04mm) swap to Marine Blue
At layer #13 (1.12mm) swap to Sky Blue
At layer #17 (1.44mm) swap to Ice Blue
At layer #22 (1.84mm) swap to Dark Brown
At layer #25 (2.08mm) swap to White for the rest.

… or use the .3mf file ;)

If you're using an AMS with 4 slots, use the file “Hueforge MTV unplugged with 1 AMS 3mf” and replace the following filaments with the new colors as you go:

• swap Black with Ice Blue (lightes blue you have)
• swap Blue (darkest blue) with Dark Brown
• swap Marine Blue (second darkest blue) with White

Have fun! :)