Hair Dryer Holder
Description
PDFStory: Our hairdryer was always lying on the washing machine, taking away too much space. Therefore I have designed a holder with an inner diameter of 90mm that can be attached to the “3rd” floor of the IKEA VILTO. You need to print two counterparts and the following items:
- 4xM3 Screws
- 4xM3 Nuts or 4xM3 Heated Inserts
I recommend using heated inserts. If you have not used heated inserts before you should get a TS101 and a soldering tip adapter for heated inserts.
25% infill & 3 perimeters! I have used PETG for more heat resistance but you can also use PLA and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| Amazon Basics | Amazon |
| GEEETECH Filament PLA | Amazon |
| ELEGOO PLA+ | Amazon |
| eSUN PLA+ | Amazon |
| JAYO PLA+ | Amazon |
PETG | |
| eSUN PETG Filament | Amazon |
| OVERTURE PETG Filament | Amazon |
| ERYONE PETG Filament | Amazon |
| SUNLU PETG Filament | Amazon |
| Polymaker PolyLite PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| extrudr® XPETG | Amazon |
| TECBEARS PETG | Amazon |
| GIANTARM PETG | Amazon |
| Elegoo Rapid PETG | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
| eSun ASA | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!
Tags
Model origin
The author marked this model as their own original creation.
