Dart Board Quick Mount

With this 3D-printed mount, you can quickly and precisely hang your dartboard. The design allows for easy rotation when needed. For added stability after installation, simply support the bottom edge of the dartboard with foam.

Required Parts

• printed parts
• 3x 3,5x25 mm Screws
• 4x Screws for the wall mount

Mounting

1. Mark a height of 1.73 m at the spot where the dartboard will hang.
2. Place the mounting plate for the dartboard into the U-shaped wall bracket and position the bracket so that the marking is centered through the hole in the dartboard plate.
3. Align the wall bracket straight and mark the four screw holes.
4. Mount the wall bracket as well as the plate onto the dartboard.
5. Hang the dartboard into the wall bracket and support the bottom edge with some foam for stability.

Changelog