Antler crown

This elegant headpiece features ornate, intertwined branches with pointed spikes and a curved silhouette, capturing the essence of fantasy and royalty. 

Crafted without the need for supports, this model is printed using PLA material, with a recommendation for a brim to ensure stability. Ideal for any creative setting, this antler crown prop stands out with its intricate and unique design, making it a perfect addition to your collection.

Printing Settings:
- Printer Model: Prusa i3 MK3S
- Layer Resolution: 0.2mm
- Nozzle Size: 0.4mm
- Slicing Software: PrusaSlicer
- Filament Material: PLA
- Bed Temperature: 60°C
- Nozzle Temperature: 210°C
- Supports: No
- Infill Percentage: 15%
- Brim: Recommended

Printing Information:
- Estimated Printing Time: 12 hours 30 minutes
- Print Volume: 200mm x 170mm x 145mm

Additional Information:
Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.