Anycubic Kobra 2 Neo

Supports: Everywhere :(

Infill: Atleast 10% (Recommend 15% or More)

Brim/Skirt/Raft: Not unless your printer has trouble printing the first few layers

Supports: Would NOT recommend Tree Supports (Organic Supports)

Printer I Used: OBVIOUSLY I used the ONE and ONLY, KOBRA 2 NEO!!!!!

I removed the spool holder on top since the real Kobra 2 Neo doesn't have that. The spool holder is actually on the left side. (I would know since I have one)